SMF Sheet Metal Forming

Abstract:

Sheet metal forming is one of the most significant manufacturing processes in industry today and is of particular importance in the automotive industry to drive advances in material technology and weight saving.
There are numerous forms of SMF including bending, stretch forming, and deep drawing.

Sheet metal forming is one of the most important manufacturing processes. This is particularly valid for the automotive industry where sheet metal forming has an even more important key position. The automotive industry is the leading sector in many countries and the main driving force behind sheet-metal-forming developments as well (Geiger, 2002).

The competition in car manufacturing is extremely strong leading to larger model variety and shorter model design cycles. The increased competition also leads to a very intense development activity to increase productivity and to reduce costs. Application of light-weight design principles is one of the most important trends to meet the above-mentioned requirements. Obviously, the new design concepts require new materials. The new materials often require new, innovative forming processes and new tooling concepts, as well.

The increased competition also requires to shorten the lead times from the concept to final realisation: to reduce the lead times, the application of various methods of Computer Aided Engineering (CAD/CAM/CAE and FEM techniques) are inevitable.

Sheet metal forming processes are mechanical processes, designed to make products from metal sheet without material removal, they are applied extensively by the manufacturing industry, to make products like kitchen sinks (deep drawing), tubes (roll bending), or panel sides for automotive applications (drawing/stretching).

The process is suited for mass production and products are pressed, fully automated, in large volumes with the help of mechanical or hydraulic presses. Each sheet metal forming process has its own characteristics features in terms of tooling and material flow. The set-up for a commonly applied deep drawing process is shown in Figure 1.

Thin, initially flat, sheet material is clamped between a blank holder and a forming die. The punch moves in the direction indicated by the arrow, and forces the sheet material to flow into the forming die. In this way the metal sheet is formed to a cup. Usually the sheet material is pre-coated with a metal forming lubricant to control friction and wear arises to sliding between the metal sheet and the blank holder and the forming die.



Figure 1: Deep drawing as an example of SMF-processes

Bending

Bending is widely used SMF operation since different kinds of shapes are possible to produce with the same equipment. In V-shape bending the punch gradually presses the sheet into a V-shaped die see Figure 2. By stopping the process after a certain punch length different shapes can be produced.



Figure 2: Schematic of the bending operation: a) free bending, b) initiating full punch and c) full punch

Other types of bending operations are U-bending, roll bending and roll forming.

Stretch forming

In stretch forming the sheet (blank) is firmly clamped at its circumference after which a punch deforms the sheet, see Figure 3. The basic difference between deep drawing and stretching is that in stretching the steel sheet is not allowed to deform between the blank holder while in deep drawing the sheet deforms and slides between the blank holder.



Figure 3: Schematic of the stretching process

Deep drawing

In deep drawing, the sheet is clamped by a blank holder and deformed by a punch. The sheet is allowed to slide between the blank holder and the die in order to avoid wrinkling of the sheet, see region I Figure 4. In deep drawing local trybosystems and contact types can be identified. In region II the highest wear rate of the tool and the sheet is expected due to a bending and unbending deformation of the sheet and high contact pressures (P ≈ 100 MPa).



Figure 4: Schematic of the deep drawing and identified contact types


References

1. M.Tisza: Recent development trends in sheet metal forming, Int. J. Microstructure and Materials Properties, Vol. 8, Nos. 1/2, 2013,p.125-140;

2. Emile van der Heide: Lubricant failure in sheet metal forming processes, PhD Thesis, University of Twente, Enschede, The Netherlands, ISBN 90-365-1724-9;

3. P.Carlsson: Surface Engineering in Sheet Metal Forming, Uppsala Universitet, Uppsala, Finland, 2005, ISBN 91-554-6136-0; ISSN 1651-6214

Søg i Vidensbasen

Skriv en sætning for at søge efter:

Søg ud fra

Fuld tekst
Nøgleord

Overskrifter
Abstracts

The Total Materia database contains many thousands of forging materials across a large range of countries and standards.

Where available, full property information can be viewed for materials including chemical composition, mechanical properties, physical properties, advanced property data and much more.

Using the Advanced Search page, it is possible to search for materials by their key descriptive words detailed in the standard title by using the Standard Description function of Advanced Search.

It maybe that you need to further narrow the search criteria by using the other fields in the Advanced Search page e.g. Country/Standard.

Then click Submit.

solution img

A list of materials will then be generated for you to choose from.

solution img

After clicking a material from the resulting list, a list of subgroups derived from standard specifications appears.

From here it is possible to view specific property data for the selected material and also to view similar and equivalent materials in our powerful cross reference tables.

solution img

For example, by clicking on the mechanical properties link on the subgroup page it is possible to view mechanical properties data for the material including yield stress, tensile stress, elongation and impact data.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.