The Nitrocarburizing Process: Part One

요약:

Nitrocarburizing, by definition, is a thermochemical treatment that is applied to a ferrous object in order to produce surface enrichment in nitrogen and carbon which in turn form a compound layer.
The composition, function and control of the furnace atmosphere are of crucial importance for the result of all hardening and thermochemical operations.

Nitrocarburizing, by definition, is a thermochemical treatment that is applied to a ferrous object in order to produce surface enrichment in nitrogen and carbon which in turn form a compound layer.

The composition, function and control of the furnace atmosphere are of crucial importance for the result of all hardening and thermochemical operations. The purpose of nitrocarburizing is to improve wear, corrosion and fatigue resistance of constructional parts. These improvements can be understood when looking at the surface microstructure and hardness after treatment, Figure 1.



Figure 1:This micrograph shows both the compound layer and the underlying diffusion zone (darker region) in a nitrocarburized 5 % Cr tool steel (2h/580°C). The compound layer consists here of only e-phase with a thin, outer, porous zone. Scanning electron micrograph (SEM) magnification about 700 times.

The nitrocarburizing process consists of three principal steps: heating, diffusion at the nitrocarburizing temperature and cooling. Pre-heating to accelerate the nitrocarburizing process and post-oxidation to improve corrosion resistance are optional steps. Ferritic nitrocarburizing in gas is commonly carried out at temperatures ranging from 560 to 580°C.

As mentioned above, the composition of the atmosphere is a very important parameter in gaseous nitrocarburizing and needs to be closely controlled. The atmosphere consists of nitrogen (N2), ammonia (NH3), carbon dioxide (CO2) and hydrogen (H2). Ammonia is used as source of nitrogen. Carbon dioxide decomposes into carbon monoxide which together with hydrogen is needed for the transfer of carbon to the steel surface. Sometimes carbon monoxide is used directly instead of carbon dioxide. Hydrogen is not always added separately as it forms from the decomposition of ammonia. Nitrogen is used to control the percentage of the other gases and for purging the furnace before and after treatment as ammonia can form an explosive mixture with oxygen. The flow rate of different gases in each process step are plotted in Figure 2.



Figure 2:Gas ratio per process step.

Nitrocarburizing is widely applied in manufacturing of machine components and tools, since improved surface hardness, fatigue strength and corrosion resistance at elevated temperatures are achieved at minimal distortion. Thus, the service life of a part is significantly extended. Moreover, corrosion nonresistant steel grades gain an enhanced corrosion resistance due to the established compound zone.


References

1. D.Krastev: Improvement of Corrosion Resistance of Steels by Surface Modification, Corrosion Resistance, Dr Shih (Ed.), 2012, ISBN: 978-953-51-0467-4;
2. TUFFTRIDE TF 1, Process, H.E.F.Duferrit, 2007, Accessed Nov 2017;
3. G. Singh, G. Brar: Modification of EN9 Steel Surface by Salt Bath Nitrocarburizing Process, Journal of Materials Science & Surface Engineering, 5(4), p.577-580, 2017, ISSN (Online): 2348-8956; 10.jmsse/2348-8956/5-4.1;
4. I.Flodström: Nitrocarburizing and High Temperature Nitriding of Steels for Bearing Applications, Diploma work No. 76/2012, Department of Materials and Manufacturing Technology Chalmers University of Technology Göteborg, Sweden;
5. F. Cajner, D. Landek, E, Stupnišek Lisac: Improvement of properties of steels applying salt bath nitrocarburizing with post-oxydation, MTAEC9, Materiali in Tehnologije, 37, 2003, 6, p.333-339, ISSN 1580-2949.

기술 자료 검색

검색할 어구를 입력하십시오:

검색 범위

본문
키워드

머릿글
요약

열처리 도표는 Total Materia 데이터베이스 내 많은 재질에서 검토하실 수 있습니다.

열처리 도표는 경화도, 경도 탬퍼링, TTT 및 CCT를 포함하며 모두 규격 데이터에서 검색하실 수 있습니다.

특수 속성 자료를 선택하려면, 고급 검색 모듈에서 특수 검색 기능을 사용하시면 됩니다.

검색 조건을 정의하려면, '국가/규격' 목록에서 귀하에게 관심 국가/규격을 선택하고 특별 검색 영역에 위치한 '열처리 도표' 박스를 체크하는 것입니다. 이는 고급 검색 페이지의 하단 부분에 있습니다.

검색 버튼을 클릭합니다.


관심 소재를 선택 후, 선택된 소재의 열처리 데이터 링크를 클릭하십시오. 열처리 기록의 개수는 링크 옆 괄호 안에 표시됩니다.


선택된 자료의 사용 가능한 모든 열처리 정보가 표시됩니다.






Total Materia 데이터베이스를 사용해 보실 수 있는 기회가 있습니다. 저희는 Total Materia 무료 체험을 통해 150,000명 이상의 사용자가 이용하고 있는 커뮤니티로 귀하를 초대합니다.