The world’s most comprehensive materials database

JIS Standard List: Castings, Forgings, Welding and Filler Materials and Powder Metallurgy/Sintered M

Abstract:

The specifications begin with the prefix JIS, followed by a letter, where the letter denotes the area of division, followed by four digits. Japanese JIS standards are widely used in Asia and the Pacific areas. JIS steel specifications have also often been used as a base for other national systems, such as Korean, Chinese, and Taiwanese.

JIS standards are developed by the Japanese Industrial Standards Committee (JISC) in Tokyo with an aim to promote the industrial standards of Japan. The below list contains standards for the following material categories:

  • Castings
  • Forgings
  • Welding and Filler Materials
  • Powder Metallurgy/Sintered Materials

For more information on the JIS designation system see Introduction to the JIS Standard Designation System.

The list of standards below covers a wide range of materials and applications a few of which are:

  • Quenched and tempered alloy steel forgings for pressure vessels
  • Corrosion-resisting and heat-resisting superalloy plates, sheets and bars
  • High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service

Castings

Standard
Number
Last
version
Description Status
B 0403 1995 Castings - System of dimensional tolerances and machining allowances  
B 0407 1978 Permissible deviations in dimensions without tolerance indication for iron castings Replaced by JIS B 0403:1995
B 0412 1978 Permissible deviations in dimensions without tolerance indication for steel castings Replaced by JIS B 0403:1995
B 0703 1987 Roundness of castings  
B 2031 1994 Gray cast iron valves  
F 2002 1976 Cast iron dog type chain cable compressors Withdrawn 1999
F 2003 1995 Cast iron deck end rollers Withdrawn 1999
F 2015 1987 Cast steel bar type chain cable stoppers Replaced by JIS F 2031:1998
F 2019 1979 Cast iron deck end rollers (small size) Withdrawn 1999
F 3058 1996 Cast steel vertical storm valves  
F 3060 1996 Cast steel screwdown vertical storm valves  
G 0307 1998 Steel castings - General technical delivery requirements  
G 0585 2002 Radiographic inspection for steel castings  
G 5101 1991 Carbon steel castings  
G 5102 1991 Steel castings for welded structure  
G 5111 1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes  
G 5121 2003 Corrosion-resistant cast steels for general applications  
G 5122 2003 Heat-resistant cast steels and alloys for general applications  
G 5131 2008 High manganese steel castings  
G 5151 1991 Steel castings for high temperature and high pressure service  
G 5152 1991 Steel castings for low temperature and high pressure service  
G 5201 1991 Centrifugally cast steel pipes for welded structure  
G 5202 1991 Centrifugally cast steel pipes for high temperature and high pressure service  
G 5501 1995 Grey iron castings  
G 5502 2001 Spheroidal graphite iron castings  
G 5503 1995 Austempered spheroidal graphite iron castings  
G 5504 2005 Heavy-walled ferritic spheroidal graphite iron castings for low temperature service  
G 5510 1999 Austenitic iron castings  
G 5511 1991 Low thermal expansive Fe-alloy castings  
G 5525 2000 Cast-iron drainage pipes and fittings  
G 5703 1988 Whiteheart malleable iron castings Replaced by JIS G 5705:2000
G 5704 1988 Pearlitic malleable iron castings  
G 5705 2000 Malleable iron castings  
G 5903 1975 Cast shot and grit  


Forgings

Standard
Number
Last
version
Description Status
B 0415 1975 Dimensional tolerance for steel die forgings (hammer and press forging)  
B 0416 1975 Dimensional tolerance for steel die forgings (upsetting)  
B 0418 1999 Machining allowance for open die forgings  
B 0706 1987 Corner and fillet radii of forged parts (hot and warm forgings)  
B 5013 1994 Die sets for press dies Withdrawn 2001
G 0306 1988 Steel forgings - General technical requirements  
G 3201 1988 Carbon steel forgings for general use  
G 3202 1988 Carbon steel forgings for pressure vessels  
G 3203 1988 Alloy steel forgings for pressure vessels for high-temperature service  
G 3204 1988 Quenched and tempered alloy steel forgings for pressure vessels  
G 3205 1988 Carbon and alloy steel forgings for pressure vessels for low-temperature service  
G 3206 1993 High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service  
G 3214 1991 Stainless steel forgings for pressure vessels  
G 3221 1988 Chromium molybdenum steel forgings for general use  
G 3222 1988 Nickel chromium molybdenum steel forgings for general use  
G 3223 1988 High tensile strength steel forgings for tower flanges  
G 3251 1988 Carbon steel blooms and billets for forgings  
G 3545 1991 Boron steel wires for cold heading and cold forging Replaced by JIS G 3508-2:2005
G 4315 2000 Stainless steel wires for cold heading and cold forging  
G 4319 1991 Stainless steel blooms and billets for forgings  
G 4320 2003 Cold-formed stainless steel sections  
G 4321 2000 Stainless steel for building structure  
G 4322 2008 Stainless steel bars for concrete reinforcement  
G 4901 1999 Corrosion-resisting and heat-resisting superalloy bars  
G 4902 1991 Corrosion-resisting and heat-resisting superalloy plates and sheets  
G 4903 2008 Seamless nickel-chromium-iron alloy pipes  
G 4904 2008 Seamless nickel-chromium-iron alloy heat exchanger tubes  


Welding and Filler materials

Standard
Number
Last
version
Description Status
G 4316 1991 Stainless steel wire rods for welding  
Z 3252 2001 Covered electrodes for cast iron  
Z 3322 2002 Materials for stainless steel overlay welding with strip electrode  
Z 3422-1 2003 Specification and approval of welding procedures for metallic materials - Welding procedure tests - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys  


Powder metallurgy/Sintered materials

Standard
Number
Last
version
Description Status
H 2601 1983 Iron powder Withdrawn 2000
Z 2500 2000 Powder metallurgy - Vocabulary  
Z 2501 2000 Sintered metal materials - Determination of density, oil content, and open porosity  
Z 2502 2000 Metallic powders - Determination of flowability by means of a calibrated funnel (Hall flowmeter)  
Z 2503 2000 Powders for powder metallurgical purposes - Sampling  
Z 2550 2000 Sintered metal materials - Specification  

Search Knowledge Base

Enter a phrase to search for:

Search by

Full text
Keywords

Headings
Abstracts

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.

solution img

By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from JIS by selecting this SDO from the popup.

solution img

The result list consists of over 1000 JIS metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.

solution img

By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.

solution img

From the list of materials, you can review detailed properties and equivalents of each material.

solution img

For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.