ASTM Standard List - Structural and Constructional Steels Standards: Part Two
Abstract
ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.
This article contains a list of standards that covers among other things:
- Specific steel standards for applications in the construction industry
- Centrifugally cast steel pipes for use at elevated temperatures
- Numerous standards covering wires, chains and anti-friction bearings
For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.
Structural and Constructional Steels: Part Two
| Standard Number |
Last version |
Description | Status |
| A 230/A 230M | 2005 | Steel Wire, Oil-Tempered Carbon Valve Spring Quality | /1/ |
| A 231/A 231M | 2004 | Chromium-Vanadium Alloy Steel Spring Wire | /1/ |
| A 232/A 232M | 2005 | Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | /1/ |
| A 241 | Hot-Worked High-Carbon Steel Tie Plates | Replaced by A 67 /no materials/ | |
| A 242/A 242M | 2009 | High-Strength Low-Alloy Structural Steel | /1/ |
| A 244 | Multiple-Wear Wrought Steel Wheels | Replaced by A 504/A 504M /no materials/ | |
| A 245 | Flat-Rolled Carbon Steel Sheets of Structural Quality | Replaced by A 570/A 570M /no materials/ | |
| A 246 | Light Gage Structural Quality Flat Rolled Carbon-Steel Sheets | Replaced by A 245 /no materials/ | |
| A 248 | Carbon-Steel and Alloy-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 273 /no materials/ | |
| A 250/A 250M | 2005 | Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | /7/ |
| A 251 | Iron and Steel Gas-Welding Rods | Withdrawn 1970 /no materials/ | |
| A 252 | Welded and Seamless Steel Pipe Piles | /3/ | |
| A 253 | Welded and Seamless Open-Hearth Iron Pipe | Withdrawn 1962 /no materials/ | |
| A 254 | 2007 | Copper-Brazed Steel Tubing | /1/ |
| A 261 | Heat-Treated Carbon-Steel Bolting Material | Withdrawn 1966 /no materials/ | |
| A 268/A 268M | 2005 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | /46/ |
| A 269 | 2008 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service | /46/ |
| A 273 | Carbon-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 711 /no materials/ | |
| A 274 | Alloy-Steel Blooms, Billets, and Slabs for Forgings | Replaced by A 711 /no materials/ | |
| A 280 | Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures | Replaced by A 335/ A 335M /no materials/ | |
| A 281 | Mild to Medium Strength Carbon-Steel Castings for General Application | Replaced by A 27/ A27M /no materials/ | |
| A 283/A 283M | 2007 | Low and Intermediate Tensile Strength Carbon Steel Plates | /4/ |
| A 284/A 284M | 1990 | Low and Intermediate Tensile Strength Carbon-Silicon Steel Plates for Machine Parts and General Construction | /2/ |
| A 285/A 285M | 2007 | Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | /3/ |
| A 286 | Heat-Treated Alloy-Steel Bars | Replaced by A 434 /no materials/ | |
| A 287 | Rolled Carbon-Steel Locomotive Frames | Withdrawn 1955 /no materials/ | |
| A 295/A 295M | 2009 | High-Carbon Anti-Friction Bearing Steel | /6/ |
| A 300 | Notch Toughness Requirements for Normalized Steel Plates for Pressure Vessels | Withdrawn 1975 /no materials/ | |
| A 301 | Chromium-Molybdenum Steel Plates for Boilers and Other Pressure Vessels | Replaced by A 387/ A 387M /no materials/ | |
| A 302/A 302M | 2007 | Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | /4/ |
| A 303 | Hot-Rolled Carbon Steel Strip of Structural Quality | Replaced by A 570/ A 570M /no materials/ | |
| A 304 | 2005 | Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | /103/ |
| A 305 | Minimum Requirements for the Deformations of Deformed Steel Bars for Concrete Reinforcement | Replaced by A 615/ A 615M /no materials/ | |
| A 306 | Carbon Steel Bars Subject to Mechanical Property Requirements | Replaced by A 663/ A 663M /no materials/ | |
| A 307 | Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | /3/ | |
| A 310 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 311/A 311M | 2004 | Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | /18/ |
| A 315 | Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures | Replaced by A 335/ A 335M /no materials/ | |
| A 321 | 2001 | Steel Bars, Carbon, Quenched and Tempered | Withdrawn 2007 /1/ |
| A 322 | 2007 | Steel Bars, Alloy, Standard Grades | /71/ |
| A 325 | 2009 | Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength | /11/ |
| A 325M | 2009 | Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] | /11/ |
| A 328/A 328M | 2007 | Steel Sheet Piling | /1/ |
| A 329 | Heat-Treated Steel Tires | Replaced by A 551/ A 551M /no materials/ | |
| A 331 | 2000 | Steel Bars, Alloy, Cold-Finished | Replaced by A 108 /no materials/ |
| A 333/A 333M | 2005 | Seamless and Welded Steel Pipe for Low-Temperature Service | /9/ |
| A 334/A 334M | 2004 | Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | /7/ |
| A 335/A 335M | 2009 | Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | /18/ |
| A 345 | 2009 | Flat-Rolled Electrical Steels for Magnetic Applications | /no materials/ |
| A 353/A 353M | 2009 | Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered | /1/ |
| A 354 | 2007 | Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | /2/ |
| A 355 | 2006 | Steel Bars, Alloys, for Nitriding | /4/ |
| A 357 | Pressure Vessel Plates, Alloy Steel, Five Percent Chromium, 0.5 percent Molybdenum | Replaced by A 387/ A 387M /no materials/ | |
| A 364 | Cold-Finished Heat-Treated Alloy-Steel Bars | Replaced by A 434 | |
| A 365 | Cold-Rolled Carbon Steel, Drawing Quality, and Special Killed | Replaced by A 619/ A 619M /no materials/ | |
| A 366/A 366M | 1997 | Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled | Replaced by A 1008/ A 1008M /4/ |
| A 373 | Structural Steel for Welding | Replaced by A 36/A36M /no materials/ | |
| A 374 | High-Strength Low-Alloy Cold-Rolled Steel Sheets and Strip | Replaced by A 606 /no materials/ | |
| A 375 | High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip | Replaced by A 606 /no materials/ | |
| A 378 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 379 | Flat-Rolled Electrical Steel | Replaced by A 345 /no materials/ | |
| A 381 | 2005 | Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | /9/ |
| A 382 | Cold-Drawn Wrought Iron Heat-Exchanger and Condenser Tubes | Withdrawn 1971 /no materials/ | |
| A 383 | 1987 | Non heat treated axles for passenger, freight, tender and locomotive trucks | /1/ |
| A 391/A 391M | 2007 | Grade 80 Alloy Steel Chain | /1/ |
| A 397 | 2006 | High Tensile Strength Carbon-Manganeses Steel Plates for Unfired Pressure Vessels | /no materials/ |
| A 400 | 2006 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | /no materials/ |
| A 401/A 401M | 2003 | Steel Wire, Chromium-Silicon Alloy | /1/ |
| A 405 | 1991 | Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service | Withdrawn 1995 /1/ |
| A 406 | High-Strength Structural Alloy Rivet Steel | Withdrawn 1965 /no materials/ | |
| A 407 | 2007 | Steel Wire, Cold-Drawn, for Coiled-Type Springs | /13/ |
| A 407M | Steel Wire, Cold-Drawn, for Coiled-Type Springs [Metric] | Withdrawn 1989 /no materials/ | |
| A 408 | Special Large Size Deformed Billet-Steel Bars for Concrete Reinforcement | Replaced by A 615/A 615M /no materials/ | |
| A 413/A 413M | 2007 | Carbon Steel Chain | /3/ |
| A 414/A 414M | 2009 | Steel, Sheet, Carbon, for Pressure Vessels | /7/ |
| A 415 | Hot-Rolled Carbon Steel Sheets, Commercial Quality | Replaced by A 569/A 569M /no materials/ | |
| A 416/A 416M | 2006 | Steel Strand, Uncoated Seven-Wire for Prestressed Concrete | /2/ |
| A 417 | 1998 | Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units | /4/ |
| A 419 | Electric-Fusion (Arc)- Welded Wrought Iron Plate pipe | Withdrawn 1971 /no materials/ | |
| A 420/A 420M | 2007 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | /4/ |
| A 421/A 421M | 2005 | Uncoated Stress-Relieved Steel Wire for Prestressed Concrete | /2/ |
| A 422 | 1964 | Butt Welds in Still Tubes for Refinery Service | Withdrawn 1994 /no materials/ |
| A 423/A 423M | 2009 | Seamless and Electric-Welded Low-Alloy Steel Tubes | /2/ |
| A 424 | 2009 | Steel, Sheet, for Porcelain Enameling | /3/ |
| A 425 | Hot-Rolled Carbon Steel Strip, Commercial Quality | Replaced by A 569/A 569M /no materials/ | |
| A 426/A 426M | 2008 | Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | /25/ |
| A 427 | 2007 | Wrought Alloy Steel Rolls for Cold and Hot Reduction | /no materials/ |
| A 431 | High-Strength Deformed Billet-Steel Bars for Concrete Reinforcement with 75,000 psi Minimum Yield Strength | Replaced by A 615/A 615M /no materials/ | |
| A 432 | Deformed Billet Steel Bars for Concrete Reinforcement with 60,000 psi Minimum Yield Point | Withdrawn 1968 /no materials/ | |
| A 433 | Leaded, Carbon Steel Plates for Pressure Vessels | Withdrawn 1972 /no materials/ | |
| A 434 | 2006 | Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | /3/ |
| A 440 | High-Strength Structural Steel | Withdrawn 1979 /1/ | |
| A 441/A 441M | High-Strength Low-Alloy Structural Manganese Vanadium Steel | Withdrawn 1989 /1/ | |
| A 442/A 442M | 1974 | Pressure Vessel Plates, Carbon Steel, Improved Transition Properties | Withdrawn 1991 |
| A 449 | 2007 | Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | /8/ |
| A 450/A 450M | 2009 | General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes | /no materials/ |
| A 451/A 451M | 2006 | Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | /13/ |
| A 452 | 1988 | Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service | Withdrawn 1995 /3/ |
| A 453/A 453M | 2008 | High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels | /4/ |
| A 454 | Steel Conveyor Chain | Withdrawn 1980 /no materials/ | |
| A 455/A 455M | 2007 | Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | /1/ |
| A 457 | Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Plate, Sheet, and Strip for High Strength at Elevated Temperatures | Withdrawn 1990 /1/ | |
| A 458 | Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures | Withdrawn 1991 /no materials/ | |
| A 460 | 2004 | Copper-Clad Steel Wire Strand | /no materials/ |
| A 466/A 466M | 2007 | Weldless Chain | /no materials/ |
| A 467/A 467M | 2007 | Machine and Coil Chain | /1/ |
| A 485 | 2003 | High Hardenability Antifriction Bearing Steel | /no materials/ |
April, 2011
Instantly Find and Compare ASTM Material Properties!
Total Materia Horizon contains detailed and precise property information for thousands of materials according to ASTM standards, updated monthly.
Get a FREE test account at Total Materia Horizon and join a community of over 500,000 users from more than 120 countries.